Installing your Headboard

Preparing Your Wall

  • Apply the wall decal to surfaces that are in good clean condition, free from dust and oils. Use a cloth to throughly clean the surface before applying.
    Please do not use any chemicals or cleaning solutions on wall prior to applying.

  • Please allow at least 30 days for walls to dry after painting before applying wall decal.

  • DO NOT apply decals onto textured surfaces such as timber, concrete, brick or a rendered wall, as the decal won’t be able to make complete contact and stick to the surface properly.


Applying Your Headboard To The Wall 

  1. Clean your wall thoroughly as described above.

  2. Use Blu Tack or painters tape to find the correct placement first, with the backing paper still on. Mark out the placement on the wall before removing the backing. 

  3. Start at the top of the decal and work your way down. Peel the backing away and stick the decal to the wall. Avoid touching the adhesive side.

  4. Using the wallpaper smoother provided, work down the applied section and smooth out and stick to the wall firmly. 

  5. Work in small sections once the first part is firmly in place, continue to remove more of the backing and work your way down the wall. Work slowly, removing small amounts of backing at a time.  If you get a wrinkle or a bubble in the headboard while installing, just peel back that area and re-apply with your smoother. If a bubble re-appears over the next few days, pressing and lightly rubbing should remove it. Bubbles may continue to occur if oil, dirt, or dust has not been removed properly from the surface, if the wall had been painted within 30 days of application or cleaning chemicals were used during preparation.

  6. Please do not remove all the backing at once, as this will make it hard to apply evenly to the wall.

Removing your Headboard

To remove your reusable headboard follow these easy steps:

  1. Start at the top and work your way down

  2. Peel your headboard off slowly and stay close to the wall

  3. Peel straight down

  4. Re-stick your headboard onto the original backing paper it arrived on for easy transportation